2004-2009 Suzuki LT-Z250 Service Manual, Page 243Get this manual

2004-2009 Suzuki LT-Z250 Service Manual, Page 243

ELECTRICAL SYSTEM IGNITION COIL RESISTANCE Disconnect the ignition coil lead wires and spark plug capMeasure the ignition
Resistance () PICKUP COIL PEAK VOLTAGE NOTE: Make sure all of the couplers are connected properlyRemove the seat(!7-5) Disconnect
the CDI unit coupler 1 Measure the pickup coil peak voltage in the following procedure: Connect the multi circuit tester
with the peak volt adaptor as followsPickup coil:Probe.GreenWhite lead wireProbe.BlackYellow lead wire09900-25008: Multi
circuit tester setWhen using the multi circuit tester and peak volt adaptor, refer to the appropriate instruction manualGenerator