2006-2009 Suzuki LT-R450 Service Manual, Page 18Get this manual

2006-2009 Suzuki LT-R450 Service Manual, Page 18

PERIODIC MAINTENANCE Check the numbers printed on the tappet shimThese numbers indicate the thickness of the tappet shim,
tappet!CAUTIONInstall the camshafts as specified(c::::73-76) After replacing the tappet shim and camshafts, rotate the crankshaft
so that the tappet is depressed fully (this will squeeze out any oil trapped between the tappet shim and the tappet that
could cause an incorrect measurement)After rotating the crankshaft, check the valve clearance again to make sure that it
is within specification When installing the cylinder head cover, apply SUZUKI BOND "1216B" to the cam end caps of the cylinder
head cover gasket99000-31230: SUZUKI BOND "1216B" Tighten the generator cover cap and valve inspection plug(c::::73-78) Apply