2006-2009 Suzuki LT-R450 Service Manual, Page 81Get this manual

2006-2009 Suzuki LT-R450 Service Manual, Page 81

Install the valve spring with the small-pitch portion cylinder head Large-pitch portion UPWARD Paint Put on the valve spring
lip CEl of the cotter fits snugly into the groove in the stem end Install the other valves and springs in the same manner
as described previously[CAUTION [ Be sure to restore each spring and valve to their original positions Be careful not to
damage the valve and valve stem when handling it Valve spring retainer Valve cotter Install the tappet shims and the tappets
to their original positions NOTE:Apply engine oil to the stem end, shim and tappet before fitting them When seating the tappet