2006-2009 Suzuki LT-R450 Service Manual, Page 89Get this manual

2006-2009 Suzuki LT-R450 Service Manual, Page 89

CONROD DEFLECTION AND BIG END SIDE CLEARANCE Wear on the big end of the conrad can be estimated by checking the movement
within the service limit by replacing the worn parts (conrad, big end bearing, crank pin, etc with new ones_ Conrad big end
side clearance Service Limit: 1.0 mm (0.04 in) nuh 09900-20803: Thickness gauge CRANKSHAFT CRANKSHAFT RUNOUT Support the
crankshaft using V-blocks and measure the crankshaft runout using the dial gauge, as shownIf the runout exceeds the service
limit, replace the crankshaft with new oneNOTE:Place the crankshaft onto the V-blocks so that it becomes horizontally Measure
the runout from the tips of the crankshaft_ Crankshaft runout Service Limit: 0.080 mm (0.003 in) 09900-20607: Dial gauge