2006-2009 Suzuki LT-R450 Service Manual, Page 122Get this manual

2006-2009 Suzuki LT-R450 Service Manual, Page 122

Position the gaps of the three ring as shownBefore inserting each piston into the cylinder, check that the gaps are so located
side on the piston head fac- [11 MOLYBDENUM OIL SOLUTION Place clean rag over the cylinder base to prevent the piston pin
circlip from dropping into the crankcaseand then fit the piston pin circlip with long-nose pliersI CAUTION Use new piston
pin circlip to prevent circlip failure with bent oneNOTE: End gap of the circlip should not be aligned with the cutaway in