2006-2009 Suzuki LT-R450 Service Manual, Page 134Get this manual

2006-2009 Suzuki LT-R450 Service Manual, Page 134

FI SYSTEM DIAGNOSIS ELECTRICAL CIRCUIT INSPECTION PROCEDURE While there are various methods for electrical circuit inspection,
of the coupler lock if equipped 1 Check for loose connection Using test male terminal, check the female terminals of the
circuit being checked for contact tensionCheck each terminal visually for poor contact (possibly caused by dirt, corrosion,
rust, entry of foreign object, etcAt the same time, check to make sure that each terminal is fully inserted in the coupler
and lockedIf contact tension is not enough, rectify the contact to increase tension or replaceThe terminals must be clean
and free of any foreign material which could impede proper terminal contact1 Check contact tension by inserting and removing2
Check each terminal for bend and proper alignment Using continuity inspect or voltage check procedure as described below,