2006-2009 Suzuki LT-R450 Service Manual, Page 135Get this manual

2006-2009 Suzuki LT-R450 Service Manual, Page 135

FI SYSTEM DIAGNOSIS Continuity check Measure resistance across coupler (between and in the figure)If no continuity is indicated
being checked, voltage check can be used as circuit check With all connectorscouplers connected and voltage applied to the
circuit being checkedmeasure voltage between each terminal and body ground If measurements were taken as shown in the figure
at the right and results are as listed below, it means that the circuit is open between terminals and Voltage Between: and
body ground: Approx5 and body groundApprox5 and body ground: 0V Also, if measured values are as listed belowresistance (abnormality)