2006-2009 Suzuki LT-R450 Service Manual, Page 172Get this manual

2006-2009 Suzuki LT-R450 Service Manual, Page 172

FI SYSTEM DIAGNOSIS Step (When indicating P0115-L:) 1) Turn the ignition switch OFF2) Check the ECT sensor coupler for loose
test (-II) 5) Connect the ECT sensor coupler6) Insert the needle pointed probe to the lead wire coupler7) Turn the ignition
switch ON 8) Measure the voltage between BBI wire and ground ECT sensor output voltage: 0.154.85 (CB BBI Ground) iT'OOL09900-25008:
Multi-circuit tester set 09900-25009: Needle pOinted probe set Tester knob indication: Voltage (=-=-=Are the continuity and