2006-2009 Suzuki LT-R450 Service Manual, Page 251Get this manual

2006-2009 Suzuki LT-R450 Service Manual, Page 251

CHASSIS A WARNING This brake system is filled with an ethylene glycol-based DOT brake fluidDo not use mix different types
them severely BRAKE PAD REPLACEMENT Remove the front wheel and front hub plate(c:::77-10) Remove the brake caliper mounting
bolts CD and brake pad mounting pins Remove the brake pads ICAUTION I Do not operate the brake lever during or after brake
pad removal Replace the brake pads as set, otherwise braking performance will be adversely affectedc; Install the new brake
padsNOTE: Before installing the new pads, inspect the pad mounting pins for wearIf excessive wear is found, replace them
with new ones Apply THREAD LOCK SUPER "1360" to the brake caliper mounting bolts CDt:: THREAD LOCK SUPER "1360" Tighten the
brake pad mounting pins mounting bolts CD to the specified torqueand brake caliper (!J Brake pad mounting pin: 18 Nm (1.8
kgf-m, 13.0 Ib-ft) Brake caliper mounting bolt: 26 Nm (2.6 kgf-m, 19.0 Ib-ft) NOTE: After replacing the brake pads, pump