2006-2009 Suzuki LT-R450 Service Manual, Page 284Get this manual

2006-2009 Suzuki LT-R450 Service Manual, Page 284

CHASSIS TOE ADJUSTMENT Adjust the toein as follows: Place the vehicle on level ground and set the handlebars straightMake
is within the specified range- =Toe-in Toe-in Standard: mm (0 0.16 in) Temporarily tighten the four lock-nuts Check that
the distancesandare equalas shownIf the distances are not equal, adjust the tie rod to the right or left until the toe-in
is within specification Check the toe-in again by measuring distances and If the toe-in is not within specification, repeat
the adjustment as above until the proper toe-in is obtained and distances and become equal After adjustment has been made,
tighten the four lock-nuts G) to the specified torque Forward NOTE: Hold the concave part of tie rod wrenchTie rod lock-nut: