2006-2009 Suzuki LT-Z50 QuadSport ATV Factory Service Manual, Page 79Get this manual

2006-2009 Suzuki LT-Z50 QuadSport ATV Factory Service Manual, Page 79

Measure the thickness of clutch shoe at the center positionIf the thickness is less than the service limit, replace the
the length is less than the service limit, replace the spring with new oneMovable driven face spring free length: Service
Limit: 73.0 mm (2.87 in) 09900-20102: Vernier calipers DRIVE BELT Inspect that the drive belt is free from any greasy substanceInspect
the contact surface of the drive belt for cracks or damage and measure the width of the drive belt with vernier calipersIf
any defects are found or the measurement exceeds the service limit, replace the drive belt with new one If grease or oil
is present on the surface of the drive belt, degrease the belt thoroughlyDrive belt width: Service Limit: 14.9 mm (0.59 in)