2006-2009 Suzuki LT-Z50 QuadSport ATV Factory Service Manual, Page 89Get this manual

2006-2009 Suzuki LT-Z50 QuadSport ATV Factory Service Manual, Page 89

CAM ROCKER ARM Assemble the cam rocker arms 1, shaft and washer 3NOTE: Align the hollows of the cam rocker arm Apply engine
mark on the cam drive gear 3NOTE: Piston must be at TDC before installing the cam assembly Apply SUZUKI BOND "1215" to the
part shown in the photograph99000-31110: SUZUKI BOND "1215" or equivalent NOTE: Make surfaces free from moisture, oil, dust
and other foreign materialsGENERATOR CASE Install the dowel pins and gasket 2 Apply engine oil to the gears The removed gasket