2006-2009 Suzuki LT-Z50 QuadSport ATV Factory Service Manual, Page 136Get this manual

2006-2009 Suzuki LT-Z50 QuadSport ATV Factory Service Manual, Page 136

CHASSIS TOE-IN ADJUSTMENT Adjust the toe-in as follows: Place the vehicle on level ground and set the handlebar straight
Check that the distance and are equal, as shownIf the distances are not equal, adjust the tie-rod to the right or left until
the toe-in is within specificationCheck the toe-in again by measuring distance and If the toe-in is not within specification,
repeat the adjustment as above until the proper toe-in is obtained and distance and become equal After adjustment has been
made, tighten the four locknuts to the specified torqueTie-rod locknut: 29 Nm (2.9 kgf-m, 21.0 lb-ft) Forward Right angle