2006-2009 Suzuki LT-Z50 QuadSport ATV Factory Service Manual, Page 142Get this manual

2006-2009 Suzuki LT-Z50 QuadSport ATV Factory Service Manual, Page 142

CHASSIS DUST SEAL Remove the dust seals with the special tool09913-50121: Oil seal remover The removed dust seals must be
replace the bearing with new one Remove the rear axle housing bearings with the special tool09921-20240: Bearing remover
set The removed bearings should be replaced with new ones Remove the spacer 1 REASSEMBLY AND REMOUNTING Reassemble and remount
the rear brake and rear axle housing in the reverse order of removal and disassemblyPay attention to the following points: