2007-2009 Suzuki LTZ90 factory service manual, Page 20Get this manual

2007-2009 Suzuki LTZ90 factory service manual, Page 20

PERIODIC MAINTENANCE Insert thickness gauge between the valve end the adjusting screw on the rocker arm If the clearance
BOND "1215" to the end caps of the cylinder head cover gasket as shown99000-31230: SUZUKI BOND "1215" (or equivalent bond)
The removed gasket must be replaced with new one to prevent oil leakage Apply engine oil to both sides of the washers Install
the cylinder head cover Lightly tighten the cylinder head cover bolts and then tighten them to the specified torqueCylinder
head cover bolt Initial: 10 Nm (1.0 kgf-m, lb-ft) Final: 14 Nm (1.4 kgf-m, 10.0 lb-ft) The removed washers must be replaced