2007-2009 Suzuki LTZ90 factory service manual, Page 78Get this manual

2007-2009 Suzuki LTZ90 factory service manual, Page 78

Piston ring thickness Standard: 1st: 0.97 0.99 mm (0.0382 0.0390 in) 2nd: 0.97 0.99 mm (0.0382 0.0390 in) PISTON RING END
the inside diameter of the conrod small endIf the inside diameter of the conrod small end exceeds the limit, replace the
conrodConrod small end I.D Service Limit: 14.040 mm0.5527 in) 09900-20602: Dial gauge (11 000 mm, mm) 09900-22403: Small
bore gauge (1835 mm) CONROD DEFLECTION AND BIG END SIDE CLEARANCE Wear on the big end of the conrod can be estimated by checking
the movement of the small end of the rodThis method can also be used to check the extent of wear on the parts of the conrod