2007-2009 Suzuki LTZ90 factory service manual, Page 88Get this manual

2007-2009 Suzuki LTZ90 factory service manual, Page 88

DRIVE SHAFT INSPECTION Inspect the drive shaft for wear or damageIf any defects are found, replace it with new one FINAL
inner race by finger to inspect for abnormal play, noise and smooth rotation while the bearings are in the those casesReplace
the bearing in the following procedure if there is anything unusual Remove the bearings with the special tool09921-20240:
Bearing remover set 1: 12 2: 17 Remove the oil seal with the special tool09913-50121: Oil seal remover NOTE: If there is