2007-2009 Suzuki LTZ90 factory service manual, Page 117Get this manual

2007-2009 Suzuki LTZ90 factory service manual, Page 117

PISTON AND CYLINDER Apply molybdenum oil solution onto the piston pin and small end of the conrodNOTE: Install the piston
should not be aligned with the cutaway in the piston pin bore Thoroughly wipe off oil from the fitting surface of the crankcase
Apply SUZUKI BOND "1215" to the crankcase as shown99000-31080: SUZUKI BOND "1215" (or equivalent bond) Install the dowel
pins and gasket onto the crankcase Hold each piston ring with the piston ring sections positioned correctly and put it into
the cylinderMake sure that the piston rings are caught by the cylinder skirtNOTE: When mounting the cylinder, after attaching