2007-2009 Suzuki LTZ90 factory service manual, Page 118Get this manual

2007-2009 Suzuki LTZ90 factory service manual, Page 118

Install the cam chain guide 2NOTE: Make sure that the guide is inserted properly or binding of the cam chain and guide may
to the specified torqueCylinder head nut 1: 25 Nm (2.5 kgf-m, 18.0 lb-ft) NOTE: Be sure to install the washer with rounded
side facing up The removed copper washers must be replaced with new ones to prevent oil leakage After tightening the cylinder
head nut to specified torque, tighten the cylinder nuts to the specified torqueCylinder head nut 2: 10 Nm (1.0 kgf-m, 7.0
lb-ft) CAMSHAFTASSEMBLY Turn the generator rotor until the line on the generator rotor is aligned with the center of the