2007-2009 Suzuki LTZ90 factory service manual, Page 133Get this manual

2007-2009 Suzuki LTZ90 factory service manual, Page 133

FUEL SYSTEM If the needle valve is worn, as shown in the illustration, replace the needle valve assembly with new oneClean
A: 16 mm (0.6 0.03 in) 09900-20102: Vernier calipers If the float height is out of specification, bend the float arm to bring
the float height to the standard range After adjusting, check the float height A REASSEMBLY AND INSTALLATION Reassemble and
install the carburetor in the reverse order of removal and disassemblyPay attention to the following points: The removed