2007-2009 Suzuki LTZ90 factory service manual, Page 165Get this manual

2007-2009 Suzuki LTZ90 factory service manual, Page 165

CHASSIS INSTALLATION Install the handlebars in the reverse order of removalPay attention to the following points: Apply adhesive
holder First tighten the bolts to the specified torque, and then tighten the bolts to the specified torqueHandlebar clamp
bolt: 25 Nm (2.5 kgf-m, 18.0 lb-ft) NOTE: The higher portion of handlebar holder must face forward, so that the clearance
of holder is in back of the handlebarsForward Align the punched mark on the handlebars with the mating surface of left brake