2007-2009 Suzuki LTZ90 factory service manual, Page 167Get this manual

2007-2009 Suzuki LTZ90 factory service manual, Page 167

CHASSIS TOE-IN ADJUSTMENT Adjust the toe-in as follows: Place the vehicle on level ground and set the handlebar straight
to the right or left until the toe-in is within the specified rangeBToe-in Toe-in Standard: 4.5 mm (0.17 0.1 in) Temporarily
tighten the four locknuts Check that the distance and are equal, as shownIf the distances are not equal, adjust the tie-rod
to the right or left until the toe-in is within specificationCheck the toe-in again by measuring distance and If the toe-in
is not within specification, repeat the adjustment as above until the proper toe-in is obtained and distance and become equal