2007-2009 Suzuki LTZ90 factory service manual, Page 192Get this manual

2007-2009 Suzuki LTZ90 factory service manual, Page 192

ELECTRICAL SYSTEM CAUTIONS IN SERVICING CONNECTOR When disconnecting connector, be sure to hold the terminals and do not
do not pull the lead wires Inspect each terminal on the coupler for being loose or bent Inspect each terminal for corrosion
and contamination Clamp the wiring harness at such positions as indicated in 7-14) "WIRING HARNESS ROUTING"( Bend the clamp
properly so that the wiring harness is clamped securely In clamping the wiring harness, use care not to allow it to hang
down Do not use wire or any other substitute for the band type clampCORRECT INCORRECT When fuse blows, always investigate