2007-2009 Suzuki LTZ90 factory service manual, Page 211Get this manual

2007-2009 Suzuki LTZ90 factory service manual, Page 211

ELECTRICAL SYSTEM IGNITION COIL RESISTANCE Disconnect the ignition coil lead wires and spark plug cap, and remove the ignition
CKP SENSOR PEAK VOLTAGE Remove the seat( NOTE: Make sure all of the couplers are connected properly Disconnect the CDI unit
coupler 1Measure the CKP sensor peak voltage in the following procedure Connect the multi-circuit tester with the peak volt
adaptor as followsCKP sensor:Probe.Brown lead wireProbe.BlackWhite lead wire or ground 09900-25008: Multi-circuit tester
set Generator coupler WR Br Generator CKP sensor Peak volt adaptor BW Br When using the multi-circuit tester and peak volt