2007-2009 Suzuki LTZ90 factory service manual, Page 212Get this manual

2007-2009 Suzuki LTZ90 factory service manual, Page 212

ELECTRICAL SYSTEM Repeat the above procedure few times and measure the highest CKP sensor peak voltageTester knob indication:
CKP sensor Peak volt adaptor CKP sensor peak voltage: 1.5 and more If the peak voltage on the generator coupler is within
the specification, but on the CDI unit coupler is not within specification, replace the wiring harness with new oneIf both
peak voltages are not within specification, replace the generator coil with new one CKP SENSOR RESISTANCE Remove the left
footrest mudguard( Disconnect the generator coupler 1 Measure the resistance with the multi-circuit testerIf the resistance
is not within the standard range, replace the generator coil09900-25008: Multi-circuit tester set Tester knob indication: