2008-2009 Suzuki 750 King Quad Service Manual, Page 6Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 6

Precautions: Never reuse circlipWhen installing new circlip, take care not to expand the end gap larger than required to
the electrical parts or servicing the FI systems, observe the following points for the safety of the systemsElectrical Parts
ConnectorCoupler When connecting connector, be sure to push it in until click is felt B831G20000003 Inspect each lead wire
circuit for poor connection by shaking it by hand lightlyIf any abnormal condition is found, repair or replace I310G1000003-02
When taking measurements at electrical connectors using tester probe, be sure to insert the probe from the wire harness side
(backside) of the connector couplerI310G1000001-01 With lock type coupler, be sure to release the lock when disconnecting,
and push it in fully to engage the lock when connecting When disconnecting the coupler, be sure to hold the coupler body
and do not pull the lead wires Inspect each terminal on the connectorcoupler for looseness or bending Push in the coupler
straightlyAn angled or skewed insertion may cause the terminal to be deformed, possibly resulting in poor electrical contact