2008-2009 Suzuki 750 King Quad Service Manual, Page 33Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 33

0B-6 Maintenance and Lubrication: 10) Insert the thickness gauge between the tappet and the camIf the clearance is out of
adjustment, total of 25 sizes of tappet shim are available ranging from 2.50 to 3.50 mm in steps of 0.05 mm CAUTION Both
the right and left valve clearances should be as closely as possible5) Fit the selected shim (2) to the valve stem end, with
numbers toward tappetBe sure to check shim size with micrometer to ensure its sizeNOTE I831G1020015-01 Adjustment The clearance
is adjusted by replacing the existing tappet shim with thicker or thinner shim1) Remove the intake or exhaust camshaftsRefer
to "Engine Top Side Disassembly in Section 1D (Page 1D-17)"2) Remove the tappet (1) and shim (2) by fingers or magnetic hand