2008-2009 Suzuki 750 King Quad Service Manual, Page 40Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 40

Maintenance and Lubrication: 3) Tighten the oil level plug (1) and oil filler plug (2) to the specified torque 0B-13 4) Tighten
ml (0.53 US qt, 0.44 Imp qt) of oilUse hypoid gear oil SAE #90, API grade GL-5NOTE Use hypoid gear oil SAE #80, API grade
GL-5, if the vehicle is ridden where the ambient temperature is below (32 F)Front differential gear oil capacity 500 ml (0.53
US qt, 0.44 lmp qt) 6) Tighten the oil level plug (2) and oil filler plug (3) to the specified torque! Front Differential
Gear Oil Replacement Replace front differential gear oil Every years B931G20206010 1) Place the vehicle on level ground2)
Remove the front under coverRefer to "Under Cover Removal and Installation in Section 9D (Page 9D-12)"3) Drain the front
differential gear oil by removing the oil drain plug (1), oil filler plug and oil level plug CAUTION Replace the gasket washers