2008-2009 Suzuki 750 King Quad Service Manual, Page 49Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 49

0B-22 Maintenance and Lubrication: If the toe-out is out of specification, bring it into the specified rangeRefer to "Toe
the tierod to the right or left until the toe-out is within specificationCheck the toe-out again by measuring distances "A"
and "B"4) If the toe-out is not within specification, repeat the adjustment as above until the proper tor-out is obtained
and distances "C" and "D" become equal"A" 1) Support the vehicle with jack and wooden blocks2) Remove the front and rear
wheels3) Inspect the suspension arm and bearing for scratches, wear, or damageIf any defects are found, replace them with
new onesRefer to "Front Shock Absorber Removal and Installation in Section 2B (Page 2B-3)"4) Inspect the front and rear shock
absorbers for oil leakage or damageIf any defects are found, replace them with new onesRefer to "Front Shock Absorber Removal