2008-2009 Suzuki 750 King Quad Service Manual, Page 53Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 53

0B-26 Maintenance and Lubrication: Compression Pressure Check Refer to "Compression Pressure Check in Section 1D (Page 1D-2)"
SDS Check Refer to "SDS Check in Section 1A (Page 1A-15)" B931G20206028 Automatic Clutch Inspection This vehicle is equipped
with centrifugal type automatic clutchTo insure proper performance and longevity of the clutch assemblies it is essential
that the clutches engage smoothly and graduallyBefore checking the initial engagement and clutch lock-up two inspection checks
must be performed to thoroughly check the operation of the drive trainInitial Engagement Inspection 1) Warm up the engine2)
Connect the tachometer or the multi circuit tester onto the spark plug high-tension cord (1) B931G20206029 CAUTION Do not
apply full power for more than seconds or damage to the clutch or engine may occurLock-up rmin 500 000 rmin If the lock-up
speed (rmin) does not coincide with the standard range, inspect the following items for any abnormalitiesRefer to "V-belt