2008-2009 Suzuki 750 King Quad Service Manual, Page 81Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 81

1A-11 Engine General Information and Diagnosis: Self-Diagnostic Procedures Use of Mode Select Switch NOTE B831G21104002 5)
seatRefer to "Seat Removal and Installation in Section 9D (Page 9D-11)"2) Connect the special tool to the mode select switch
at the wiring harnessSpecial tool (A): 0993082720 (Mode select switch) I718H1110006-04 I831G1110015-01 6) After repairing
the trouble, turn OFF the ignition switch and turn ON againIf DTC is indicated (C00), the malfunction is clearedNOTE Even
though DTC (C00) is indicated, the previous malfunction history DTC still remains stored in the ECMTherefore, erase the history
DTC memorized in the ECM using SDS DTC is memorized in the ECM also when the wire coupler of any sensor is disconnectedTherefore,
when wire coupler has been disconnected at the time of diagnosis, erase the stored history DTC using SDSRefer to "Use of
SDS Diagnosis Reset Procedures (Page 1A-13)"7) Turn the ignition switch OFF and disconnect the special tool from the mode
select switch8) Reinstall the seat I831G1110006-01 3) Start the engine or crank the engine for more than seconds4) Turn the