2008-2009 Suzuki 750 King Quad Service Manual, Page 83Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 83

1A-13 Engine General Information and Diagnosis: 4) Start the engine or crank the engine for more than seconds5) Check the
OFF8) Disconnect the SDS tool and install the right frame cover3) Check the DTC4) The previous malfunction history code (Past
DTC) still remains stored in the ECMTherefore, erase the history code memorized in the ECM using SDS tool5) Click "Clear"
(2) to delete history code (Past DTC) I705H1110005-01 6) Follow the displayed instructions Use of SDS Diagnosis Reset Procedures
I705H1110006-01 B831G21104003 The malfunction code is memorized in the ECM also when the wire coupler of any sensor is disconnectedTherefore,
when wire coupler has been disconnected at the time of diagnosis, erase the stored malfunction history code using SDS1) After
repairing the trouble, turn OFF the ignition switch and turn ON again2) Click the DTC inspection button (1)I705H1110009-01