2008-2009 Suzuki 750 King Quad Service Manual, Page 145Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 145

1C-4 Engine Electrical Devices: ECT Sensor Removal and Installation Removal 1) Drain engine coolantRefer to "Cooling System
indicated, replace it with new one! B831G21306012 CAUTION Do not contact the ECT sensor and the column thermometer with panSpecial
tool (A): 0990025008 (Multi-circuit tester set) Tester knob indication Resistance) I831G1130010-01 Installation Install the
ECT sensor in the reverse order of removalPay attention to the following points: Tighten the ECT sensor to the specified
torque! Temperature sensor specification Temperature Standard resistance 20 (68 F) Approx2.45 50 (122 F) Approx0.811 80 (176
F) Approx0.318 110 (230 F) Approx0.142 k CAUTION(A) Use the new gasket washer (1) to prevent engine coolant leakageTightening
torque ECT sensor (a): 18 Nm (1.8 kgf-m, 13.0 lb-ft) I718H1130014-01 4) Install the ECT sensorRefer to "ECT Sensor Removal