2008-2009 Suzuki 750 King Quad Service Manual, Page 154Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 154

Engine Mechanical: 5) Remove the IAT sensor coupler (5) and PCV hose (6) 1D-6 Throttle Cable Removal and Installation Removal
air cleaner box mounting bolts to the specified torqueTightening torque Air cleaner box mounting bolt (a): 4.5 Nm (0.45 kgf-m,
3.0 lb-ft)(a) Installation Install the throttle cables in the reverse order of removalPay attention to the following points:
Install the throttle cable as shown in the cable routing diagramRefer to "Throttle Cable Routing Diagram (Page 1D-1)" Check
the throttle cable play and proper operation Throttle Cable Inspection Check that the throttle lever moves smoothly from
full open to full closeIf it does not move smoothly, lubricate the throttle cable B831G21406006 Throttle Cable Play Inspection