2008-2009 Suzuki 750 King Quad Service Manual, Page 159Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 159

1D-11 Engine Mechanical: 5) Remove the TP sensor (5)NOTE Prior to disassembly, mark the TP sensors original position with
with the groove "B" of TP sensor Apply grease to the secondary throttle shaft end "A" if necessary: Grease 9900025010 (SUZUKI
SUPER GREASE or equivalent) I831G1140035-01 Special tool0993011950 (Torx wrench) Tightening torque TP sensor mounting screw:
Nm (0.2 kgf-m, 1.5 lb-ft) CAUTION Never remove the throttle valve (6) I831G1140040-01 I831G1140038-01 CAUTION NOTE Make sure
the TP valve open or close smoothlyIf the TP sensor adjustment is necessary, refer to "TP Sensor Adjustment in Section 1C