2008-2009 Suzuki 750 King Quad Service Manual, Page 161Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 161

1D-13 Engine Mechanical: Throttle Body Inspection and Cleaning Refer to "Throttle Body Disassembly and Assembly (Page 1D-10)"Cleaning!
passagewaysIf the components cannot be cleaned with spray cleaner it may be necessary to use dip-type cleaning solution and
allow them to soakAlways follow the chemical manufacturer's instructions for proper use and cleaning of the throttle body
componentsDo not apply carburetor cleaning chemicals to the rubber and plastic materialsInspection Check following items
for any defects or cloggingReplace the throttle body if necessary O-ring Throttle valve Vacuum hose I831G1140049-02 Engine
Assembly Removal Before taking the engine out of the frame, wash the engine using steam cleanerEngine removal is sequentially
explained in the following steps: 1) Drain engine oilRefer to "Engine Oil and Filter Replacement in Section 0B (Page 0B-10)"2)
Drain engine coolantRefer to "Cooling System Inspection in Section 0B (Page 0B-15)"3) Remove the seatRefer to "Seat Removal