2008-2009 Suzuki 750 King Quad Service Manual, Page 164Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 164

Engine Mechanical: 23) Support engine with jack and remove the engine mounting bolts and nuts 1D-16 When installing the engine
torqueTightening torque Engine mounting nut (a): 60 Nm (6.0 kgf-m, 43.5 lb-ft) NOTE The engine mounting nuts are self-lockingOnce
the nuts have been removed, they are no longer of any use B831G21406014 I831G1140070-05 Install the front propeller shaft
and front differential assemblyRefer to "Front Drive (Differential) Assembly Removal and Installation in Section 3B (Page
3B-4)" Install the rear propeller shaft and rear differential assemblyRefer to "Final Gear Assembly Removal and Installation
in Section 3B (Page 3B-23)" Apply thread lock to the footrest bolts (4), and tighten them to the specified torque: Thread