2008-2009 Suzuki 750 King Quad Service Manual, Page 170Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 170

Engine Mechanical: Place clean rag over the cylinder base so as not to drop the piston pin circlip (1) into the crankcase
Insert the piston into the cylinder (1) Temporarily tighten the cylinder base nuts (2) Apply engine oil to sliding surface
of the cylinder.I831G1140106-02 CAUTION Apply molybdenum oil solution to the sliding surface of the pistonMO: Molybdenum
oil (MOLYBDENUM OIL SOLUTION) Apply bond lightly to the mating surfaces of crankcases: Sealant 9900031110 (SUZUKI BOND No.1215
or equivalent) Fit the dowel pins (1) and the new gasket (2)! When installing the cylinder, pull the cam chain upward, or
the chain will be caught between the crankcase and cam drive sprocket CAUTION Replace the cylinder gasket (2) with new oneI831G1140109-02