2008-2009 Suzuki 750 King Quad Service Manual, Page 175Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 175

1D-27 Engine Mechanical: Be sure to check and adjust the valve clearanceRefer to "Valve Clearance Inspection and Adjustment
Apply bond to the cam end caps of the gasket as shown in the figure: Sealant 9900031230 (SUZUKI BOND No.1216B or equivalent)
I831G1140131-01 Spark plug Install the spark plugRefer to "Spark Plug Cap and Spark Plug Removal and Installation in Section
1H (Page 1H-3)"Valve Timing Inspection Plug Tighten the valve timing inspection plug (1) to the specified torqueTightening
torque Valve timing inspection plug (a): 23 Nm (2.3 kgfm, 16.5 lb-ft) I831G1140129-01 CAUTION Use the gaskets with new ones
to prevent oil leakage Apply engine oil to the both sides of head cover washers I831G1140329-01 I831G1140130-01 Throttle