2008-2009 Suzuki 750 King Quad Service Manual, Page 183Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 183

1D-35 Engine Mechanical: Install the other valves and springs in the same manner as described previously Install the tappet
Refer to "Cylinder Head Disassembly and Assembly (Page 1D-31)" B831G21406025 Cylinder Head Distortion 1) Decarbonize the
combustion chambers2) Check the gasket surface of the cylinder head for distortionUse straightedge and thickness gaugeTake
clearance readings at several placesIf readings exceed the service limit, replace the cylinder headSpecial tool0990020803
(Thickness gauge) Cylinder head distortion Service limit: 0.05 mm (0.002 in) Valve Head Radial Runout Place the dial gauge
at right angle to the valve head face and measure the valve head radial runoutIf it measures more than the service limit,
replace the valveSpecial tool (A): 0990020607 (Dial gauge (1100 mm, 10 mm)) (B): 0990020701 (Magnetic stand) (C): 0990021304