2008-2009 Suzuki 750 King Quad Service Manual, Page 188Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 188

Engine Mechanical: Valve Seat Repair The valve seats (1) for both the intake and exhaust valves are machined to three different
mm I.D(0.2165 0.2170 in)! Exhaust 15 45 60 33 mm (1.30 in) I831G1140171-01 CAUTION Measure the thrust clearance between the
idle gear and shim by using thickness gaugeSpecial tool (A): 0990020803 (Thickness gauge) Cam drive idle gearsprocket thrust
clearance Standard: 0.15 0.27 mm (0.006 0.011 in) The valve seat contact area must be inspected after each cut Do not use
lapping compound after the final cut is madeThe finished valve seat should have velvety smooth finish but not highly polished
or shiny finishThis will provide soft surface for the final seating of the valve which will occur during the first few seconds