2008-2009 Suzuki 750 King Quad Service Manual, Page 192Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 192

Engine Mechanical: Piston Ring-to-groove Clearance Measure the side clearances of the 1st and 2nd piston rings using the
mm (0.0425 0.0433) Standard: (2nd): 0.97 0.99 mm (0.0382 0.0390 in) Piston Ring Free End Gap and Piston Ring End Gap Measure
the piston ring free end gap using vernier calipersNext, fit the piston ring squarely into the cylinder and measure the piston
ring end gap using the thickness gaugeIf any of the measurements exceed the service limit, replace the piston ring with new
oneSpecial tool (A): 0990020101 (Vernier calipers (115 mm, 150 mm)) Piston ring free end gap Service limit: (1st): 10.5 mm
(0.41 in) Service limit: (2nd): 11.7 mm (0.46 in) Special tool (B): 0990020803 (Thickness gauge) Piston ring end gap Service
limit: (1st): 0.50 mm (0.020 in) Service limit: (2nd): 0.50 mm (0.020 in) I649G1140265-03 I831G1140183-03 I831G1140336-01