2008-2009 Suzuki 750 King Quad Service Manual, Page 208Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 208

Engine Mechanical: Conrod Deflection Wear On the big end of the conrod can be estimated by checking the movement of the small
limit: 0.08 mm (0.003 in) Special tool (A): 0990020607 (Dial gauge (1100 mm, 10 mm))0990020701 (Magnetic stand)0990021304
(V-block (100 mm)) I831G1140293-01 Conrod Big End Side Clearance 1) Check the conrod big end side clearance with the thickness
gaugeSpecial tool (A): 0990020803 (Thickness gauge) Conrod big end side clearance Service limit: 1.0 mm (0.04 in) 2) If the
clearance exceeds the limit, replace the crankshaft assembly and conrod with new one(A) I705H1140241-01 Width Between Crankshaft