2008-2009 Suzuki 750 King Quad Service Manual, Page 225Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 225

1E-5 Engine Lubrication System: Installation Install the oil jet in the reverse order of removalPay attention to the following
I831G1150011-01 Oil Jet Inspection Refer to "Oil Jet Removal and Installation (Page 1E-4)"Make sure that the oil jet is not
cloggedIf it is clogged, clean the oil passage using wire of the proper size and compressed air B831G21506006 5) Hold the
crank balancer driven gear with the special tool and remove the oil pump drive gear bolt and washerSpecial tool (A): 0992053740
(Clutch sleeve hub holder) I831G1150010-02 I831G1150012-01 Oil Pump Removal and Installation Removal NOTE Do not drop the
each parts into the crankcase B831G21506007 6) Remove the oil pump drive gear (5) along with the chain (6)5 1) Drain the