2008-2009 Suzuki 750 King Quad Service Manual, Page 233Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 233

1F-5 Engine Cooling System: Radiator Cap Inspection Inspect the radiator cap in the following procedures: 1) Remove the radiator
it with new oneRadiator cap release pressure 110 140 kPa (1.1 1.4 kgfcm2, 15.6 19.9 psi) 4) After finishing the radiator
cap inspection, reinstall the removed partsI831G1160062-01 Radiator Inspection and Cleaning Cooling Fan AssemblyRadiator
Removal and Installation B831G21606003 Radiator Hose Refer to "Cooling System Inspection in Section 0B (Page 0B-15)" Radiator
Inspect the radiator for water leaksIf any defects are found, replace the radiator with new oneIf the fins are bent or dented,
repair them by carefully straightening them with the blade of small screwdriver Removal 1) Remove the front fenderRefer to