2008-2009 Suzuki 750 King Quad Service Manual, Page 242Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 242

Engine Cooling System: Installation Install the water pump in the reverse order of removalPay attention to the following
Remove the O-rings (1), snap ring (2), washer (3) and water pump driven gear (4) I831G1160037-02 2) Remove the water pump
cover (5)I831G1160035-01 Tighten the water pump mounting bolts (4) to the specified torqueTightening torque Water pump mounting
bolt (a): 10 Nm (1.0 kgfm, 7.0 lb-ft) I831G1160038-01 3) Remove the O-ring (6) I831G1160036-01 Connect the water hoses securelyRefer
to "Water Hose Routing Diagram (Page 1F-3)" Pour engine oil and coolantRefer to "Engine Oil and Filter Replacement in Section