2008-2009 Suzuki 750 King Quad Service Manual, Page 274Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 274

Starting System: Starter Motor Removal and Installation B831G21906002 Removal 1) Turn the ignition switch OFF and disconnect
mounting bolt (a): 10 Nm (1.0 kgfm, 7.0 lb-ft) Starter motor lead wire mounting nut (b): Nm0.6 kgf-m, 4.5 lb-ft)(b) I831G1190003-01
I831G1190005-01 4) Remove the starter motorInstallation Install the starter motor in the reverse order of removalPay attention
to the following points: Apply grease to the starter motor O-ring: Grease 9900025010 (SUZUKI SUPER GREASE or equivalent)!
Starter Motor Disassembly and Assembly Refer to "Starter Motor Removal and Installation (Page 1I-4)" B831G21906003 Disassembly
Disassemble the starter motor as shown in the starter motor components diagramRefer to "Starter Motor Components (Page 1I-3)"Assembly