2008-2009 Suzuki 750 King Quad Service Manual, Page 293Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 293

1J-4 Charging System: 3) Measure the resistance between the three lead wiresIf the resistance is out of specified value,
After finishing the inspection, reinstall the removed partsNo-load Performance 1) Remove the side covers, left and rightRefer
to "Front Side Exterior Parts Removal and Installation in Section 9D (Page 9D-6)"2) Connect the tachometer onto the spark
plug hightension cord3) Disconnect the generator coupler (1) Removal 1) Disconnect the () battery lead wireRefer to "Battery
Removal and Installation (Page 1J-12)"2) Drain engine oilRefer to "Engine Oil and Filter Replacement in Section 0B (Page
0B-10)"3) Remove the left inner fenderRefer to "Front Side Exterior Parts Removal and Installation in Section 9D (Page 9D-6)"4)
Remove the left mud guardRefer to "Rear Side Exterior Parts Removal and Installation in Section 9D (Page 9D-9)"5) Drain engine
coolantRefer to "Cooling System Inspection in Section 0B (Page 0B-15)"6) Remove the water pump assemblyRefer to "Water Pump