2008-2009 Suzuki 750 King Quad Service Manual, Page 316Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 316

2B-7 Front Suspension: Install the brake caliperRefer to "Front Brake Caliper Removal and Installation in Section 4B (Page
seal remover) CAUTION The removed cotter pin (14) must be replaced with new one I831G1220025-03 2) Remove the snap ring (2)
with the special tool14 Special tool0990006108 (Snap ring pliers) I831G1220023-02 Front Hub Bearing Inspection Inspect the
inner race play of the front hub bearing by hand while they are in the steering knuckleRotate the inner races by hand to
inspect for abnormal noise and smooth rotationIf there is anything unusual, replace the front hub bearing with new one"a"
"a" B831G22206008 I831G1220026-02 3) Remove the inner dust seal (3) with the special toolSpecial tool (A): 0991350121 (Oil