2008-2009 Suzuki 750 King Quad Service Manual, Page 319Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 319

Front Suspension: 3) Set the steering knuckle (3) and install the suspension upper arm (4)4) Temporarily tighten the suspension
Wheel HubSteering Knuckle Removal and Installation (Page 2B-4)"6) Tighten the nuts to the specified torqueTightening torque
Suspension arm pivot nut (Upper) (b): 60 Nm6.0 kgf-m, 43.5 lb-ft) Shock absorber mounting nut (c): 60 Nm (6.0 kgf-m, 43.5
lb-ft) LOWER I831G1220039-01 I831G1220040-01 I831G1220038-02 7) Install the brake hoseRefer to "Front Brake Hose Removal
and Installation in Section 4A (Page 4A-7)"8) Install the inner fenderRefer to "Front Side Exterior Parts Removal and Installation